Switchboard - All industrial manufacturers - EU-Vietnam Business Network (EVBN)

System pro E power is the innovative ABB’s main distribution switchboard solution with rated current up to 6300A and short-circuit current up to 120kA. Designed to easily fulfill all electrical installation requirements …

Series VIT-AFSBY isolated power panels are equipped with an isolation transformer as well as with a changeover and monitoring module including all necessary monitoring components as to DIN VDE 100-710 for IT systems: • Changeover device …

Series VIT-A isolated power panels are equipped with an isolation transformer as well as with a changeover and monitoring module including all necessary monitoring components as to DIN VDE 100-7010 and IEC 60364-7-710 for IT systems: • …

See the other products ENELT Group Co. Ltd.

ALTERNATING CURRENT BOARDS The alternating current board or the auxiliary board (AB) is intended for distribution of electricity to several lines feeding substation’s auxiliary consumers. In addition, the alternating current board …

Federal EasyPan distribution boards, which are used for power distribution, illumination applications, installation control and protection against over current at residences and industrial facilities, are manufactured in accordance with …

… for receiving and distributing electric energy and controlling, protecting and monitoring circuit. Product Type MV Switchboard Design standard GB3906-2006 3.6kv-40.5kv / (IEC 62271-200: 2003 Alternating-current …

See the other products HAWEE PRODUCTION AND TRADING JCS

Introductions Medium voltage switchboard is used for power switching, distribution and metering in medium voltage network or loads. Medium voltage switchboard is designed and type tested according to …

See the other products Shandong Luyitong Electric PLC.

This series of products are suitable for indoor single busbar and single busbar section in power system, of three-phase AC 50Hz, 40.5kV rated voltage, and main busbar rated current up to 2500A. For the moment, the technical parameters …

See the other products GEWISS

These exterior mounting planks are designed with removable structure and IP30-40-55-65 amount of defense to withstand 160A current. The product can be assembled quickly due to the removable structure and swift union of brackets, bars …

Eaton’s Crouse-Hinds Businessnmakes explosion protection a snap – and that also applies to distributions. Electrical distributions for Ex-areas must be protected according to EN 60079 by constructional measures. Thus, the Eaton’s …

See the other products Beijing SOJO Electric Co., Ltd

Overview It is suitable for all power distribution systems and locations that require a three-phase alternative current with a frequency of 50(60)Hz and a rated voltage from 380V to 660V such as power systems, petrochemical industries, …

See the other products Siemens Low-voltage – Power distribution

SIVACON S8 low-voltage switchboard Optimize your operations and maintenance with integrated digital solutions. Benefit from a modular switchboard that flexibly meets your requirements with a high level …

modular for industrial applications for motor control

Creation of multiple network configurations (modular concept). Individual connections and a connection to the Low Voltage electrical network. Main Features This range combines all of the network functions at one point: breaking, …

See the other products Fritz Driescher & Söhne GmbH

DRIESCHER low voltage distribution systems are in compliance with the valid VDE regulations. • tested according to DIN EN 60439-1 • reliable DRIESCHER long service life due to galvanized steel framework • 4 weeks delivery at maximum …

See the other products Fritz Driescher & Söhne GmbH

DRIESCHER low voltage distribution systems are in compliance withthe valid VDE regulations. • tested according to DIN EN 60439-1 • reliable DRIESCHER long service life due to galvanized steelframework • 4 weeks delivery at maximum …

See the other products Fritz Driescher & Söhne GmbH

The Type D103 is a low-voltage distribution panel engineered by Driescher. It is utilized as a module for accessible and non-accessible unit substations. The modular construction features a self-supporting base plate out of steel plate. The …

The Littelfuse Coordination Panel provides a simple, time-saving solution for circuits that require selective coordination. Emergency Systems (NEC® 700.27), Legally Required Standby Systems (NEC®701.18), and Healthcare Essential Electrical …

{{#each product.specData:i}} {{name}} : {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === “PRICE_RANGE” }} – {{product.productPrice.formattedPriceMax}} {{/if}}

{{#each product.specData:i}} {{name}} : {{value}} {{#i!=(product.specData.length-1)}} {{/end}} {{/each}}

{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === “PRICE_RANGE” }} – {{product.productPrice.formattedPriceMax}} {{/if}}

& reach your clients in one place, all year round

not specified

& reach your clients in one place, all year round

Your answer has been taken into account. Thank-you for your help.

Your suggestions for improvement:

Evaluate the quality of the search results:

TELL US WHAT YOU THINK

Subscribe to our newsletter

Receive updates on this section every two weeks.