Network Connection Destination Host Unreachable – Red Hat Customer Portal

I have set up a Red Hat Enterprise Linux Server Release 6.5. I currently cannot connect to this machine from the local network nor can I connect to the internet or the internal network from the server. This has been a problem since the day it was set up and I have been unable to resolve it. My file settings are below.

Firewall is disabled

/etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.0.0.10 vtadc.vantonecf.com
10.0.0.105 rhlinux.vantonecf.com

/etc/resolv.conf
“#” Generated by NetworkManager
search vantonecf.com
nameserver 10.0.0.10
nameserver 208.67.220.220

/etc/sysconfig/network-scripts/ifcfg-em1
DEVICE=em1
TYPE=Ethernet
UUID=ef93bd6a-c2b9-4605-9fc0-95e0812b5095
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME=eth0
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=yes
IPADDR=10.0.0.105
PREFIX=24
GATEWAY=10.0.0.1
DNS1=10.0.0.10
NETMASK=255.255.255.0
DNS2=208.67.220.220
USERCTL=no
HWADDR=74:86:7A:EE:3C:04
DOMAIN=vantonecf.com
LAST_CONNECT=1415736614

/etc/sysconfig/network-scripts/ifcfg-em2
DEVICE=em2
TYPE=Ethernet
UUID=f88a770e-6a14-4403-b40f-b1efeb218dc6
ONBOOT=no
NM_CONTROLLED=yes
BOOTPROTO=dhcp
HWADDR=74:86:7A:EE:3C:06
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME=eth1
LAST_CONNECT=1409848091
USERCTL=no

/etc/sysconfig/network-scripts/ifcfg-lo
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
“#” If you’re having problems with gated making 127.0.0.0/8 a martian,
“#” you can change this to something else (255.255.255.255, for example)
BROADCAST=127.255.255.255
ONBOOT=yes
NAME=loopback

netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window rtt Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 em1
0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 em1

route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 1 0 0 em1
0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 em1

If I set the network card to DHCP it will take me to an internet connection for the internet provider requiring a login. If there is anything else you need let me know.