How to Restart Network on Ubuntu 20.04
There are various situations where you may have to restart the network on Ubuntu. It may be because the network settings were changed. It may be because the network connection is acting weird. Generally, whenever there’s a problem with the system, a common treatment is performing a reboot. However, if it’s a problem related to the network, then it’s possible to just restart the network.In this guide, check out how to restart the network on Ubuntu 20.04. There are various methods you can follow to restart the network on Ubuntu. It can be performed directly from the GUI or through the terminal. Depending on your preference, follow the one that suits you.
Mục Lục
Restart network from GUI
In this section, I’ll be assuming that you’re using Ubuntu 20.04 with the default GNOME desktop.
Restart network from the desktop
Click on the top-right network icon on the screen.
Select the network connection and press “Turn Off”. It will disable the network connection.
To enable it again, go through the same process. This time, there’ll be a different option “Connect”. Click “Connect” to re-establish the network connection.
Restart network from GNOME Settings
You can also do this directly from the GNOME “Settings”.
From the left panel, select “Network”.
Disable and enable the connected network(s).
Restart network from CLI
When working with the CLI, there are multiple ways of taking action. We can take action on the network manager service or use other tools like nmcli, ifup, nmtui, etc.
Restart network manager service
This is one of the easiest ways of restarting the network service. It’s equivalent to the graphical method demonstrated above.
Fire up a terminal and run the following command.
$
sudo
service network-manager restart
Restart network service using systemd
Systemd offers an array of system components to the system. Part of it is handling the services. The previous method is only an alternative one of this method. Systemd is directly told to restart the service rather than going through any hoops.
$
sudo
systemctl restart NetworkManager.service
Restart network using nmcli
The nmcli tool is a powerful tool for managing the network connection on Linux machines. It’s a popular one among system admins because of its ease of use.
First, turn off the network connection.
$
sudo
nmcli networking off
Then, turn it back on.
$
sudo
nmcli networking on
Restart network using ifup and ifdown
The ifup and ifdown commands handle a network interface directly. It’s one of the most basic networking commands on Linux. The ifdown command turns off all network interfaces and the ifup command turns them on.
The ifup and ifdown commands come with the ifupdown package. By default, it doesn’t come with Ubuntu. Thankfully, it’s directly available from the official Ubuntu repo. Install them right away.
$
sudo
apt update
&&
sudo
apt
install
ifupdown
-y
Once the installation is complete, perform the network restart.
$
sudo
ifdown
-a
$
sudo
ifup
-a
It’s a good practice to combine both commands in a single line.
$
sudo
ifdown
-a
&&
sudo
ifup
-a
Restart network using nmtui
The nmtui tool is yet another network management tool that’s widely popular among system admins. Unlike the other CLI tools, it offers an interactive way of managing network connections that’s similar to the GUI method.
In the case of Ubuntu 20.04, it comes by default. Launch the tool.
$
sudo
nmtui
To navigate the tool, use the arrow keys. Select “Activate a connection”.
You’ll land on a screen with a list with all the network connections. Select the appropriate one and select “Deactivate”.
Once deactivated, activate the connection.
The network has been successfully restarted. Quit the application.
Restart network using IP command
The ip command is a powerful way of managing the network connections on Linux. It can be used for restarting the network connection. This method is applicable to any Linux distro.
To work with the ip command, first, we need to know the target network interface. Use the following command for the network interface.
$
ip link
show
In my case, the target network interface is enp0s3. Let’s restart the network.
$
sudo
ip link
set
enp0s3 down
$
sudo
ip link
set
enp0s3 up
Final thoughts
Restarting the network is a common solution to various network-related problems. If it didn’t yet solve the issue, then the next recommended action is restarting the system. If the problem persists, then it’s worth investigating further.
Interested in learning more about network configuration? Check out this guide on Ubuntu 20.04 network configuration.
Enjoy!