What's the Difference: Hub vs Switch vs Router | FS Community

In an Ethernet network, there are some networking devices that play their roles at various levels such as hubs, switches and routers. The
functions of the three devices are all quite different from one another, even if sometimes they are all integrated into a single device. due to that, many people feel confused about the differences between the hub, switch, and router. The following part will focus on the topic—hub vs switch vs router, aiming to clarify differences among them.

Mục Lục

What Are Hub, Switch and Router?

Hub

Hub is commonly used to connect segments of a LAN (Local Area Network). A hub contains multiple ports. When a packet arrives at one
port, it is copied to the other ports so that all segments of the LAN can see all packets. Hub acts as a common connection point for devices
in a network.

Switch

A switch operates at the data link layer (layer 2) and sometimes the network layer (layer 3) of the OSI (Open Systems Interconnection)
Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case
of Ethernet networks, switched Ethernet LANs. In networks, the switch is the device that filters and forwards packets between LAN segments. See more information on Network Switch and Selection Suggestions.

Router

A router is connected to at least two networks, commonly two LANs or WANs (Wide Area Networks) or a LAN and its ISP.s (Internet
Service Provider.s) network. The router is generally located at gateways, the places where two or more networks connect. Using headers and
forwarding tables, router determines the best path to forward the packets. In addition, router uses protocols such as ICMP (Internet Control
Message Protocol) to communicate with each other and configures the best route between any two hosts. In a word, router forwards data
packets along with networks.

Hub vs Switch vs Router

In network equipment and devices, data is usually transmitted in the form of a frame. When a frame is received, it is amplified and then
transmitted to the port of the destination PC (Personal Computer). The big difference between hub and switch is in the method in which
frames are being delivered.

In a hub, a frame is passed along or “broadcast” to every one of its ports. It doesn’t matter that the frame is only
destined for one port. The hub has no way of distinguishing which port a frame should be sent to. Additionally, a 10/100Mbps hub must share
its bandwidth with each and every one of its ports. In comparison, a switch keeps a record of the MAC (Media Access Control) addresses of all
the devices connected to it. With this information, a network switch can identify which system is sitting on which port. So when a frame is
received, it knows exactly which port to send it to, without significantly increasing network response times. In addition, unlike a hub, a
10/100Mbps switch will allocate a full 10/100Mbps to each of its ports. So regardless of the number of PCs transmitting, users will always
have access to the maximum amount of bandwidth.

Unlike an Ethernet hub or switch that is concerned with transmitting frames, a router is to route packets to other networks until that
packet ultimately reaches its destination. One of the key features of a packet is that it not only contains data but the destination address of
where it’s going. What’s more, router is the only one of these three devices that will allow you to share a single IP (Internet
Protocol) address among multiple network clients.

You can have a clear view of the comparison among hub vs switch vs router here:

template

Hub

Switch

Router

Layer

Physical layer

Data link layer

Network layer

Function

To connect a network of personal computers together, they can be joined through a central hub

Allow connections to multiple devices, manage ports, manage VLAN security settings

Direct data in a network

Data Transmission form

electrical signal or bits

frame & packet

packet

Port

4/12 ports

multi-port, usually between 4 and 48

2/4/5/8 ports

Transmission type

Frame flooding, unicast, multicast or broadcast

First broadcast, then unicast and/or multicast depends on the need

At Initial Level Broadcast then Uni-cast and multicast

Device type

Non-intelligent device

Intelligent device

Used in(LAN, MAN, WAN)

LAN

LAN, MAN, WAN

Transmission mode

Half duplex

Half/Full duplex

Full duplex

Speed

10Mbps

10/100Mbps, 1Gbps

1-100Mbps(wireless); 100Mbps-1Gbps(wired)

Address used for data transmission

MAC address

IP address

Conclusion

The differences between hub, switch and router is a confusing term for users. Understanding these distinctions among them can be helpful to find the most appropriate device for your network. I hope this article will help you get clear about the knowledge of hub vs switch vs router and get able to choose the devices you need after reading this.

Related Articles:

Layer 2 vs Layer 3 Switch: Which One Do You Need?
Network Switch vs Network Router vs Network Firewall
What Is VPN Router and Why You Need It?