Fix: Unidentified Network on Windows 7/8/10 – MajorGeeks

-=- Advertisement -=-

1: Restart Your Router and Computer

While this step is essentially Tech Support 101, we can’t ignore it. Shut down your computer. Go to your router and turn it off by unplugging from the wall or back of the router. Twiddle your thumbs for a minute, then plug the router back in and turn your computer back on.

2: Reset or Flush Winsock TCP/IP and Windows DNS Cache

To try and keep this page as small as possible, we’re going to wrap all three cleanup procedures into one. Each of these steps is easy, safe, and have pages to walk you through the steps. They are:

3: Reset Your Network

Click on Start > Settings > Network & Internet.

Scroll down and click on Network reset. The standard Windows warning shows up.

Click on Reset now to complete the reset and reboot. If Windows automatically detects your network adapters, they should come back after the reboot. If Windows doesn’t recognize your network card, be sure you have the drivers before you begin.

4: Run Troubleshooters

Windows 10 users can try . There are four troubleshooters to try here. To speed things along, you might find it faster from the Command Prompt:

Open and typer in the following:

Internet Connections: msdt.exe -id NetworkDiagnosticsWeb
Incoming Connections: msdt.exe -id NetworkDiagnosticsInbound
Network Adapter: msdt.exe -id NetworkDiagnosticsNetworkAdapter
Hardware and Devices: msdt.exe -id HardwareandDevices

-=- Advertisement -=-

5: Remove and Reinstall the Adapter and Drivers

Make sure you have the latest driver for your network card before proceeding.

Open Device Manager by pressing the Windows Key + X or use the Windows Key + S and type in Device manager.

Locate the network adapter that you’re using (wired or wireless) and right-click on that and click Uninstall device. Now, reboot your computer and wait while Windows detects the “new” hardware and installs it.

If that didn’t work, we want to update the driver. Of course, if your network card didn’t install correctly, use the driver you saved earlier. If the network card installed properly, now update the driver by or use .

6: Disable Security Software

We’ve seen numerous security software including McAfee’s cause issues with networks. This is especially true for those running multiple security apps including firewalls, antivirus, antimalware, etc. Consider disabling as many as you can and see if one of your security apps is the culprit.

7: Bad Hardware

We hope you didn’t make it down this far, but there’s another obvious consideration here; your network card is bad. In a perfect world, you have, or can get your hands on, a USB wireless network adapter to see if that works. If you plug in a wireless USB adapter and it works, you can bet your network card has failed or is failing.

Similar:

Please enable JavaScript to view the comments powered by Disqus.
comments powered by

Disqus

If, while trying to connect to a network, you receive an error “Unidentified network,” there are numerous possible solutions, and we’ve compiled them all for you.While this step is essentially Tech Support 101, we can’t ignore it. Shut down your computer. Go to your router and turn it off by unplugging from the wall or back of the router. Twiddle your thumbs for a minute, then plug the router back in and turn your computer back on.To try and keep this page as small as possible, we’re going to wrap all three cleanup procedures into one. Each of these steps is easy, safe, and have pages to walk you through the steps. They are:Click onScroll down and click on. The standard Windows warning shows up.Click onto complete the reset and reboot. If Windows automatically detects your network adapters, they should come back after the reboot. If Windows doesn’t recognize your network card, be sure you have the driversyou begin.Windows 10 users can try. There are four troubleshooters to try here. To speed things along, you might find it faster from the Command Prompt:Openand typer in the following:Internet Connections:Incoming Connections:Network Adapter:Hardware and Devices:Make sure you have the latest driver for your network card before proceeding.Openby pressing theor use the Windows Key + S and type in Device manager.Locate the network adapter that you’re using (wired or wireless) and right-click on that and click. Now, reboot your computer and wait while Windows detects the “new” hardware and installs it.If that didn’t work, we want to update the driver. Of course, if your network card didn’t install correctly, use the driver you saved earlier. If the network card installed properly, now update the driver byor useWe’ve seen numerous security software including McAfee’s cause issues with networks. This is especially true for those running multiple security apps including firewalls, antivirus, antimalware, etc. Consider disabling as many as you can and see if one of your security apps is the culprit.We hope you didn’t make it down this far, but there’s another obvious consideration here; your network card is bad. In a perfect world, you have, or can get your hands on, a USB wireless network adapter to see if that works. If you plug in a wireless USB adapter and it works, you can bet your network card has failed or is failing.Similar: