Electric_Cylinders – ETH Series Electric Cylinder from Parker Hannifin

The Parker ETH Series is the next generation of the industry proven ET Series. This high-force, ball-screw driven, electric cylinder employs a dramatically new and improved ball nut and screw design paired with over-sized thrust bearings in order to attain industry leading force density and allowing it to compete with similarly sized roller screw and hydraulic products. Relative to its predecessor this means a dramatic increase in force output allowing the designer to reduce one frame size and attain the same or better performance, which equates to space savings and cost reduction. The ETH is ideally suited for thrust type applications such as pressing, bending and forming and offers significant control advantages over typical fluid power solutions.

• 5 frame sizes (ISO 32, 50, 80, 100 and 125)
• Oversized ball screw and thrust bearings
• Max thrust- 114,000 N
• Max speed- 1.7 ms
• Max stroke- 2 m
• Duty Cycle- 100 percent

Additional products to build your total Parker solution:

Electric_CylindersRotary Servo Motors Servo Drives
ETH Series Electric CylinderMPP/MPJ Series MotorsCompax3 Servo Drive

Other Products in This Category:

Electric_Cylinders ~ Featured Products

 
Force A ISO 32
Force B ISO 50
Force C ISO 80
Force D ISO 100
Force E ISO 125
Max Accel.
Max Speed
Max Stroke

ETH Series Electric Cylinder
382 lbs
730 lbs
1686 lbs
N/A
N/A
15 m/s
1.7 m/s
1.6 m