Connecting your AV/AVR to a Network using Scanning Network

How do I connect my Marantz AV/AVR to a network?

How do I connect my Marantz AV/AVR to a network?

Your AV/AVR can be connected to a network using a wired LAN (Ethernet cable) connection or via wireless (Wi-Fi) communication. 

Here, we will explain how to connect your AV/AVR to a Wi-Fi network.

(Please refer to your Owner’s Manual for Wired – Ethernet connection).

You can connect your AVR to a Wi-Fi network in four different ways:

• Scanning Network (DHCP)

• Using your iOS device

• Using WPS Router

• Manually (Static IP)

Note:

This procedure only covers the

“Scanning Network”

method

(Please refer to your Owner’s Manual for the other methods of Wi-Fi connection).

Preparation:

• Make sure the external Wi-Fi/Bluetooth antennas are connected on the rear panel and oriented in their full upright position. 
• Make sure your AVR is connected to a TV via HDMI cable.
• Turn on your AVR.

Procedure:

1. Press the “Setup” button on the remote control.
2. Select “Network” from the menu.
3. Then, select “Connection” followed by “Wi-Fi Setup”.
4. You can now select “Scan Network” from the menu’s options.
5. Select the network you wish to connect to from the list and follow the prompts.

Click

Click here for instructions on how to determine if your AVR has been updated to the latest firmware.