EU-Vietnam Business Network (EVBN) > blog Leading > Toshiba leading innovation stuck how to reset

Toshiba leading innovation stuck how to reset

Hello, I’m going to start by suggesting that you look at this previous forum response. It would appear that they had a similar issue to yourself, and theres was resolved .

The takeaway advice being: Plug the charger in and leave it for at least 12 hours then try again !

Let me know if this helps.

David Webb

Content Editor and Community Manager – CCM.net

I had similar problem on my old A200. After removing the HARD drive, I was able to enter the BIOS settings.
I replaced the HARD drive with a new one and now it works perfectly.

Try to do the same thing. Remove the HARD disk, restart the máy tính, just to see if you will be able to enter the BIOS .

  • Satellite Pro P300 – 23L : can’t get màn hình hiển thị Toshiba Leading Innovation This is a cut and paste from a previous post, but the one I’m having a problem with today ( save me typing again ! ) :
    When I start my máy tính, it stops on the first màn hình hiển thị of the Toshiba innovation and only gives the opportunity to do two things. That’s what he said to prevent the page * ” Press F2 to enter Setup, F12 to access the selection of Multiboot Menu ” * I tried both. I pressed F2, I press F12 and no one bothers me pst màn hình hiển thị
    – When I press on either after the Toshiba màn hình hiển thị is visible, they do nothing-If I press ” F2 ” at the start, upward, the instructions at the bottom of the page says ” Please Wait “. However, I waited for hours and nothing ever happened. The ” Please wait ” message just sitting there. – If I press F12 during startup, upwards, the instructions at the bottom of the page says ” press F2 SETUP, Entering boot device selection menu … ” Then he is there and does anything justThe màn hình hiển thị Toshiba Leading Innovation remains all the time .
    I have tried removeing the battery and draining flea power – this does not solve the problem .
    When I restart the máy tính, I get the situation according to the line 1 above. No amount of tap F8 does nothing … I’m still back to the page of the main Innovation of Toshiba .
    The fan works, but the HARD disk led never sparkles .
    Any suggestions please ? Thank you Hello
    If the máy tính is unable to pass the home màn hình hiển thị Toshiba ( POST-puissance on self test ) then this behavior of the máy tính is mainly related to a serious hardware problem .
    The defective HARD drive would not cause such a problem, because even if the HARD drive is faulty, the máy tính must be able to pass such màn hình hiển thị …
    So I guess there is something wrong with the RAM or the motherboard. Here you can check how to remove the RAM modules and insert the new memory :http://APS2.toshiba-tro.de/KB0/CRU9902O80001R01.htm
    If the problem is not related to defective RAM, then other parts like the motherboard ( maybe module BIOS EPROM ) must be verified … but such verification requires additional special tools and that’s why I think it would be a job for a máy tính technicians …
  • Satellite C50D – Stuck on splash màn hình hiển thị ” Toshiba leading innovation. Hey I have a new máy tính of Toshiba C50D-A satellite .

    When I start it it won t go Toshiba leading innovation > screen. I can access the start screen by pressing F12 and accesses the Setup utility by pressing f2.
    Someone has ideas of how to do to solve this problem? Or what’s wrong with it

    Hello
    On this virtual path, it is not easy to say what the problem is here. Can enter you recover or repair options – http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm ?If so try please use some repair options.

  • Satellite U940 – 10 c freeze after show ” Toshiba leading innovation. Good afternoon .
    My U940 stucks in the màn hình hiển thị ” Toshiba leading innovation ” and it is impossible to get to the BIOS ( F2 or F12 ). I tried unplugging all the memories ( RAM, SSD, HARD drive ) and the main battery ; but it was useless .

    Any ideas?
    Thanks in advance!

    In my opinion, your motherboard is affected.
    I’m not quite sure what part of the motherboard could cause such problems, but in my personal opinion that replacement motherboard could help you to fix this m

  • Satellite L300D 242 hangs on the TOSHIBA Leading Innovation page Hello

    When I turn it on the laptop crashes: press F2 go to the configuration utility, F12 to start the Manager of… of which work niether
    The screen is a black background with TOSHIBA Leading Innovation > about this

    After a few minutes, it goes away leaving me with a black screen with nothing on it, as if it was in mode ‘sleep’ I think that
    But I can’t seem to go as a result of check or search for anything, not even to restore the system.

    Model is a 4 months of ideas please before considering back under warranty … it could be something simple I’m just missing
    BTW not very comp savy
    Thanks Isabelle

    Hi Isabelle,.
    Looks like a hdd dead to me…

    If the warranty is still valid go and see a servicepartner …

  • Satellite Pro S500 – Freezed at Toshiba leading innovation frontpage Hello
    My new Satellite Pro S500, age : 2 hours have just made the ‘ start-up ‘ and installed all the drivers. My first step was to spend + updated windows + and update various security patches, etc. Windows identified 74 updates – and let the máy tính do the tải về. He installed about 15 % and restarted automatically. The máy tính started upwards, installed about 30 % and restarted .
    Now, the máy tính has * freezed * on the first page of ” Toshiba – Leading Innovation “. If I try to power off the máy tính computer he turns to fashion – watch and go back to the page of ” Toshiba ” once again .
    Any ideas of how out of this loop ?

    Thanks in advance
    B

    Hey, .
    And have you ever tried to remove the battery and the AC / DC adapter ? Try this and leave both disconnected for at least an hour .
    Then install the battery and plug in the AC adapter and try restarting your máy tính. T he past the BIOS Toshiba screen now ?

  • Satellite A100-906 – gel @ Toshiba Leading Innovation Hi all
    All the world is facing a problem where the máy tính freezes on Toshiba Leading Innovation. The weird part is that, when you connect the máy tính to an external monitor, everything works well. I tried to replace the LCD, Inverter, cable LCD and VGA ( its Nvidia 256 ) and still the same problem .Updated the bios to version 6.0 always the same. Read in some forum that downgrading to version 5.90 will solve so made but still the same thing .
    I don’t know if it has nothing to do with the error of TPM secure that I get. When I turn on the máy tính and you press ESC before it freezes, after memory check it says that ” no TPM or TPM has problem ” ( note that this error even when you plug in an external monitor but on external everything works fine. and after loading windows if you switch the monitor to the portable computer LCD máy tính works very well without any problem )
    I check in the Bios, TPM option is greyed out then you cannot activate or disable it from BIOS. Hello
    I think it s a hardware problem seriously looks like the motherboard could be assigned to all ports ( VGA port as well ) are part of the motherboard. It s very strange that the máy tính could start only if the external monitor is connected, but in my opinion, this can be only a related problem of the motherboardI have no other explanation
    Sorry mate for this General info, but that’s all I can suggest to the present case
  • NetBook NB100 : Black màn hình hiển thị after Toshiba leading innovation It occurs something strange with my N-100 Netbook .
    It has always worked perfectly, but today, when I try to initiate, it appears on-screen typical ‘ Innovation leader Toshiba ‘, but then the màn hình hiển thị goes black, and do not appear ” windows “. I hear a sort of high-pitched noise inside your computer .
    I’m not exactly good computers and I tried pressing F2 and look at the different options, but none of them was not like the solution, and I’m afraid I can ruin my computer ( I mean, even more ) with my computer ignorance .
    Did someone knows what can happen ? I’m completely hopeless !
    now fix this = solve my life XDThank you very much !Gracies ! Hello

    Are you able to press F8 while the laptop is turned on?
    To do this and check if you can choose the option repair my computer, then the HARD drive recovery.

    You should also check the BIOS.
    Immediately after pressing the power button, press F2. This allows you to access the BIOS. You can then check if the HARD drive is recognized.

    Sorry mate but it of difficult to say what’s wrong here

  • AT200 crashes playing music and the màn hình hiển thị switch off Hello

    first of all, I want to apologize for my bad English.
    I ve got an AT-200 and I have this problem: when I listen to music and turn off the screen, the music begins to shake (like when you have a blue screen error in windows) and she don’t brokes down.

    I can’t unlock the màn hình hiển thị, can ´ t even turn on the màn hình hiển thị and wait until the battery is empty. I have updated drivers through the app from toshiba, but that did not work .
    Has anyone here the same problems ?

    Your
    Alex

    > It shows the màn hình hiển thị Toshiba, but that no loading screens .
    Yes, if this cannot be solved by the hard reset, I recommend this send to service or replace it with another.

  • Windows XP Home edition does not charge up – màn hình hiển thị Toshiba and then nothing I opened my computer to stand by earlier. And received an error message such as :

    WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE…
    Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

    I also tried to “last good configuration” but who also refuses to load.
    I can, however, in the BIOS.

    The black and white background writes startup màn hình hiển thị that flashes briefly upward when after that the toshiba màn hình hiển thị doesn’t even come to the top .
    I have a P100-429 Satilite using XP SP2 ( or 3 ) does not remember .
    Is this a hardware problem ? I lose data ?
    I am aware that my system was clean and I was using a good anti-virus .
    Please please let me know if you have any suggestions or comments .
    Thanks in advance, Max … Hi RisSsky ,
    you are in a deep deep sh … t … No. not really … Looks like the filestructure hard disk is damaged.the hard drive is recognized by the bios ? means, it is listed as a device ?There is a sound of the hard drive ? scratch or buzzing or ticking ?
    CHKDSK may help, but I would ‘ safe mode ‘ where you want not to lose data on disk .
    don’t panik, we will do things .
    2 options to solve this problem : the first and save : – Remove the old hdd ( you need later ) – get a new hard drive and make a recovery / installation on the new drive. – also get a usb – hdd connector to access old data hdd and copy on the new disk.or the 2 nd : – run chkdsk on your hard drive, maybe you need to do this with a ” live-system-on-cd. Be aware that if there is a problem it will get worse …- start in safe mode

    If you’re lucky, the 2nd option will do.
    as said before I’d do it “the safe way.

  • HP Pavilion p6-2069sc : computer hangs during the HP splash màn hình hiển thị Hello .
    I plug an ASUS GeForce GTX STRIX 750T i to use in my Pavilion P6 – 2069 sc, but when I start the computer after installing my GPU, the màn hình hiển thị hangs on the blue HP startup màn hình hiển thị .
    When I try to hit the ESC key to enter the BIOS or any other keys it comes just a beep of the machine .
    It is a long beep every 20 seconds or so from the computer .
    When I use the integrated graphics card, everything works as they should .
    I already upgraded to 550W 300W POWER supply Because your computer has been manufacturer Sept 2011, there Legacy BIOS. The latest vBIOS UEFI was initiated at the HP units at end of 2012. That said, either you stay with a Legacy BIOS GPU card, or choose a dual hybrid card BIOS. The GTX 660, or GTX 670, all of which are two high-end of the legacy card would be far superior to the GTX 750T i. All the current hype is looking for a lower quality card, the 750T i, based on the more low power and some GTX offering a BIOS hybrid via Select manufacturer. The Asus could not be hybrids, as you can testify .
    http://www.hwcompare.com/17301/GeForce-GTX-660-vs-GeForce-GTX-750-TI/ 450W SS6
    http://www.hwcompare.com/17306/GeForce-GTX-750-TI-vs-GeForce-GTX-670/ 550W PSU
    http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications
    Based on your existing new POWER Pack, ( hopefully a quality unit ), 660 GTX would be good. In my humble OPINION, an EVGA GTX 660 is better based on your power supply of the system. Please call EVGA for re – check a Legacy BIOS .

    PS I have a EVGA GTX 660 and 670 in my BIOS Legacy of <>towers.  I tried an ASUS, but he did not have an ASUS motherboard. Strange, but ASUS check the fault has his own card. Cost me $50 return shipping cost, so Please check with any manufcacturer.

  • Computer hangs on a white màn hình hiển thị on startup with the keyboard is plugged. Original title : I have a problem starting
    I have a problem when I start my pc with my internet stick plugged and it hangs on a white màn hình hiển thị. I have to get the key out and close my pc and reboot to get to the màn hình hiển thị to login manually .
    This also happens randomly – some days it just starts with the key and the other days he dislikes the key and goes to blank màn hình hiển thị .
    Why is this randomly – this is my question ? If the settings are the same so why did happen randomly instead of blocking me or just start every time ? Why is it random ? Hi donga65 ,

    • To go through the other advice?

    Try Method 1 to downstairs, go to the method 2 If this does not resolve the issue .

    Method 1: You can update the drivers for the computer to check the issue. Log on to the manufacturer’s Web site and install all the device driver updates including the chipset. See if it helps.

    Method 2: Make sure that the BIOS (Basic Input\Output System) is not altered. Check the boot sequence and make sure that the hard drive is the first boot device. Check with the manufacturer for more details.

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this helps.

  • My vista computer hangs when I right click on the màn hình hiển thị and scroll again. My vista computer hangs when I right click on the màn hình hiển thị and scroll again. I guess it’s a problem with the windows Explorer. I ran virus and malware scan and also led the sfc. I always get the same result. If anyone has faced this problem and knows the Fox please help

    It could be a problem with the shell extensions.
    Check out these links to see if they might be able to help:

    Make a right-click is slow or weird behavior caused by context menus managers
    and
    ShellExView – Shell Extension Manager for Windows

  • When install Vista Home Premium computer hangs on the language selection màn hình hiển thị. No visible cursor, the keyboard and the mouse does not. Hi, when I try to install vista that Home Premium 32 bits on the computer of my son, through the installation of loading files with the gray bar at the bottom, then goes to the màn hình hiển thị language selection, at this stage, I can not select anything using the keyboard or the mouse. There is no cursor visible. Keyboard and mouse both work fine in the bios and on other machines. Have used other keyboards and mice on the machine in question, but that makes no difference. Tried another copy of vista, no difference. Tested on Windows 7 install and everything works fine !
    Very confused, thinking that it must be a driver problem, but how about him ? Any help is appreciated ! Hi Rickydg ,
    Thanks for posting. Please contact ASUS and see if there is a BIOS update available for your system. Update the BIOS and then try to install again .
    I hope this helps ! Shawn – Support Engineer – MCP, MCDSTMicrosoft Answers Support EngineerVisit our Microsoft answers feedback Forum and let us know what you think
  • My computer hangs at the Windows loading màn hình hiển thị OR blue màn hình hiển thị comes up saying I need to install the hardware. Hi, I recently got a computer and I just realized that whenever I turn it on after a long period of time ( eteindre turn off during the night, turn it on morning ) my computer freezes at windows startup màn hình hiển thị. Sometimes a blue error màn hình hiển thị appears and after reading it, I would say that a material is not installed correctly. After graduating with my computer, I am sure that I have installed the latest updates, but im not sure what is causing this problem .
    Would be very happy to help !
    Thanks a bunch ! : D

    Follow these steps to try to solve your problems of boot.

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
    Do Safe Mode system restore, if it is impossible to do in Normal Mode .
    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER .
    Try a restore of the system once, to choose a Restore Point prior to your problem …
    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc .
    http://www.windowsvistauserguide.com/system_restore.htm
    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box .
    ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts .
    Go to your Bios / Setup, or the Boot Menu at startup and change the Boot order to make the DVD / CD drive 1 st in the boot order, then reboot with the disk in the drive .
    At the startup / power on you should see at the bottom of the màn hình hiển thị either F2 or DELETE, go to Setup / Bios or F12 for the Boot Menu .
    When you have changed that, insert the Bootable disk you did in the drive and reboot .
    http://www.bleepingcomputer.com/tutorials/tutorial148.html
    Link above shows what the process looks like and a manual, it load the repair options .
    NeoSmart containing the content of the Windows Vista DVD ‘ Recovery Centre ‘, as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable truyền thông truyền thông freely from Microsoft ( namely the Microsoft WAIK, several gigabyte tải về ) ; but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own .
    Read all the info on the website on how to create and use :
    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
    ISO Burner : http://www.snapfiles.com/get/active-isoburner.html
    It’s a very good Vista startup repair disk .
    You can do a system restart tool, system, etc it restore .

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon .
    Mick Murphy – Microsoft partner

Source: https://evbn.org
Category : blog Leading

Bài viết liên quan
Bài viết mới
Thể Thao nổi bật