CPU Cooler: Liquid Cooling Vs. Air Cooling – Intel

Which Is Right for You?

Both cooling options are highly effective when properly implemented, but excel in different circumstances. Here are a few factors to consider when making your choice.

Price

Price can vary substantially depending on the features you’re prioritizing. Generally speaking, though, air coolers cost less due to their more straightforward operation.

There are entry-level and premium versions of both. A premium version of an air cooler might have a larger heatsink, better fans, and provide different aesthetic options. A high-end All-in-One (AIO) liquid cooler might have a larger radiator, and offer a mix of aesthetic and functional customization, such as software to control fan speeds and lighting.

Both air and liquid CPU coolers are priced across a large spectrum, depending on the features you’re looking for.

Ease of Installation

Though an All-in-One (AIO) liquid cooler is often more complex to install than a standard air cooler, it’s still fairly straightforward. Most consist of only the waterblock, the two hoses that cycle the coolant, and the radiator. The extra steps involve attaching the waterblock, which is a process similar to installing an air cooler, and then attaching the radiator and the fans in such a way that the excess heat can easily exit the PC. Since the coolant, pump, and radiator are self-contained in the apparatus (hence the name “All-in-One (AIO)”), it requires very little oversight or maintenance after installation.

Installing a custom loop, on the other hand, requires more effort and education on the part of the builder. The initial installation process might be more time-consuming, but the added flexibility allows for significantly more customization and the option of including other components such as a GPU into the loop if desired. These more complex custom loops can also support builds of all shapes and sizes when properly implemented.

Size

Air coolers can be bulky, but that bulk is limited to one area, as opposed to being distributed across your system. With an All-in-One (AIO), on the other hand, you’ll need space for the radiator, and will also need to factor in issues like proper orientation and alignment of the waterblock and coolant tubes.

That said, if you’re working in a smaller build, a bulky air cooler might not be the best option. A low-profile air cooler or an All-in-One (AIO) with a small radiator could be a better fit. When planning your upgrade or choosing your case, ensure that you have sufficient space for your cooling solution of choice and that your case supports the hardware you’ve selected.

Sound

Liquid cooling, especially when using an All-in-One (AIO), tends to be quieter than the fan on a CPU heatsink. Again, this can vary, in that there are air coolers with fans specifically designed to reduce noise, and fan settings or fan selection can impact the amount of noise generated. Overall, though, liquid cooling tends to generate less sound, as the small pump is usually well insulated, and radiator fans tend to run at lower RPM (revolutions per minute) than those on the CPU heatsink.

Temperature Regulation

If you’re serious about overclocking, or plan on undertaking CPU-intensive tasks like rendering video or streaming, liquid cooling might be the best choice.

According to Mark Gallina, liquid cooling more “efficiently distributes heat over more convection surface area (radiator) than pure conduction, allowing for reduced fan speeds (better acoustics) or higher total power.”

In other words, it’s more efficient, and often quieter. If you want the lowest possible temperatures, or if you’re interested in a quieter solution and don’t mind a slightly more complex installation process, liquid cooling is probably the best option.

Air coolers are quite good at relocating heat away from the CPU, but keep in mind that heat is then dispersed into the case. This can raise the ambient temperature of the system overall. Liquid coolers do a better job of relocating that heat outside of the system via the fans on the radiator.