Wireless Network Configuration → Windows XP Using WPA

From the Wireless Dialog box you have already opened, click on the link
titled ‘Change advanced settings’ as shown in the picture below.

You should now have a dialog box similar to the following:

Click on the ‘Wireless Networks’ tab of the dialog box, which will get a
screen similar to the following:

Click on the ‘Add’ button as circled above, and you will get a window similar
to the following:

As shown above, on the ‘Network name (SSID)’ line, enter ‘UMKCWPA’, on the
‘Network Authentication’ line select ‘WPA2’, on the ‘Data encryption’ line
select ‘AES’.  If you are not able to select ‘WPA2’ or ‘WPA’ please go back
to the previous web page and select the second set of Windows XP Wireless
instructions.

Click on the ‘Authentication’ tab, and you will get a page similar to the
following:

As shown above, set the line ‘EAP type’ to ‘Protected EAP (PEAP)’.

Click on the ‘Properties’ button, and you will get a page similar to the
following:

As shown above, un-check the option for ‘Validate server certificate’, and
set the ‘Select Authentication Method’ line to ‘Secured password (EAP-MSCHAP
v2).  Optionally check the option for ‘Enable Fast Reconnect’.

Click on the ‘Configure’ button, and you will get a screen similar to the
following:

As shown above, un-check the option to automatically logon.  This option
must be turned off, or the wrong username will be sent to the campus network.

Click ‘OK’ on each of the 4 open windows.  Once you have closed all 4
windows, you should have the wireless window as shown below:

Click on the line for ‘UMKCWPA’ and click ‘Connect’ as shown above.  You
will then get a window similar to the following:

While the above window is on the screen, in the lower-right-hand corner of
your computer screen, you will get a pop-up similar to the following:

Click on this pop-up, so that you can logon to the network.  You will
then get a window similar to the following:

Enter your UMKC username and password as prompted, and click OK.  Your
wireless network list should now show UMKCWPA with ‘Connected’ as shown below:

Your computer should now automatically connect to UMKC wireless on each
future visit. 

If you change your UMKC password, you will need to enter your new password by
clicking on the ‘Click here to select a certificate or other credentials for
connection to the network UMKCWPA’ pop-up as shown 3 images above, and you can
then enter your new password on the box that will look like the box shown 2
images above.