Mechanical chain hoist – S series – Hitachi Europe GmbH – electric / electro-magnetic

Suitable for general work. Economical standard speed model.

SUSPENSION TYPE

Single speed model
Dual speed model
Single phase model

HIGHLIGHTS

HELICAL GEARING
used where practical to provide quiet operation.

LONG LIFE BRAKE UNIT
Disk type Electro-Magnetic brake system for steady
operation and long life.

ELECTRO-MAGNETIC CONTACTOR
with mechanical-interlocking against line short by mechanical shock.

POWER CHAIN
special (patented) alloy steel chain surface hardened for optimum strength and wear resistance. (DIN-5684-8)

CHAIN CONTAINER
as standard part for safer operation.

LOWER HOOK
is heat-treated and equipped with safety latch and 360º swivelling.

TRANSFORMER
Fuse is built in a primary side to prevent overheat.

REVERSE PHASE INSPECTING RELAY
cut control circuit when reverse phasing. Except the 3 phase models of 250 kg and 500 kg, and single phase models.

LIMIT SWITCH (Upper and Lower)
interrupt motor power to prevent hook overtravel and hazardous condition such as chain kink.

PLUG-IN CABLES
reduce maintenance time and installation.

PUSHBUTTON CABLE
is molded with strain relief wire rope into one body. This assures easier and safer operation.

PUSHBUTTON SWITCH
is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked. The 24 volt control circuit reduce shock hazard to the operation.