Mavic 2 Enterprise Series – DJI

The Mavic 2 Enterprise is built on the Mavic 2 flight platform. It is an all-in-one drone solution for industrial applications.
It features an extended port to mount DJI modular accessories, and comes with a self-heating battery, 24 GB onboard storage, DJI AirSense, and is compatible with the DJI Pilot mobile app.

The Mavic 2 Enterprise was specifically built to serve industries and applications in public safety, inspection, search & rescue, fire response, and law enforcement.

No. We strongly advise that you do not fly your Mavic 2 Enterprise during rainy weather.

Sensing for the left and right directions is only available with Tripod Mode, please pay attention to the surroundings when flying in P Mode and S Mode.

No. Only Auto mode is available.

Note: The M icon shown under the camera settings turns gray, which cannot be tapped. This is not an app or camera error.

Password protection is used to protect the data that the user stores on the device’s onboard storage.

No. The password protection function only works on the device’s 24 GB onboard storage.

1.When powering on the aircraft;
2. After connecting the aircraft with the remote controller;
3. When accessing the onboard storage data via a computer.

GPS timestamping records the time and GPS coordinates of when and where images are taken.

You can enable GPS timestamping in Camera Settings.

Yes, but the GPS Timestamp can only be added in Visible Mode.

No. Currently, you can only adjust the spotlight angle manually before flight.

The spotlight is capable of assisting the onboard camera to shoot clearly at around 30 meters away.

Depending on background noise conditions, about 20 to 40 meters in general conditions.

You can use the speaker to:

1.Play voice messages that are pre-recorded with the DJI Pilot app.

2.Transmit real-time voice call-outs on the ground.

Depending on environments, approximately 5 kilometers in general conditions.

In addition to all the newly added and improved features like the modular accessories, AirSense, Password Protection, and more, the Mavic 2 Enterprise features OcuSync 2.0 – a new transmission system, capable of operating at a distance of up to 10 kilometers, and offers higher resolution, better anti-interference during flight, and lower latency.

Approximately 2 hours and 15 minutes.

When the temperature is between -20°C to 6°C and the battery power is higher than 50%, if the battery is powered off, press and hold the battery power button for 5 seconds to enable self-heating.
If it is powered on and is mounted on an aircraft, the self-heating function will be automatically enabled.

The batteries are capable of managing their battery levels automatically at all times.

The Mavic 2 Enteprise is only compatible with the DJI Pilot mobile app.

The Mavic 2 Enterprise Dual supports Spot Meter and Area Measurement.

FFC stands for Flat Field Correction. After the calibration, the thermal image quality will be improved, and the temperature change is easier to be observed.

A. The influence of the atmosphere: The higher the temperature and the humidity of the atmosphere, the greater the temperature measurement error.
B. The distance between the camera and the object: The farther the distance, the greater the temperature measurement error.
C. The emissivity and background temperature of the object: When the surface emissivity of the measured object is low, and the background temperature is high, it will cause a large temperature measurement error.

Due to real-time digital enhancements, the photo and video size of the thermal data is larger than the sensor’s native resolution.