How to Fix Ethernet "Unidentified Network" Problem on Windows 10

Your Network Adapter Status Says “Unidentified Network”? Find Out How You Can Fix It

If your network adapter’s status says “Unidentified Network – No Internet,” then know that something is wrong from your side. This article will help you fix the “Unidentified Network” problem.

Unidentified Network No Internet

What Causes the “Unidentified Network – No Internet” Problem?

Our research has determined that, generally, there can be four causes for this issue.

Incorrect IP configuration typically causes this problem. When your computer connects to a network, it’s assigned an IP address. If the IP configuration is incorrect, you can get the “Unidentified Network” status.
This issue can also occur if your Network settings have been tampered with and set incorrectly.
The third known cause for “Unidentified Network” is network adapter drivers, as your computer may have outdated or wrong drivers installed.
Finally, the last known cause for “Unidentified Network” is third-party software, particularly antivirus programs that interfere with network settings and prevent your PC from connecting to the web. We recommend that you temporarily disable your antivirus program to see if that fixes the problem.

We have prepared several guides that can help you fix this issue. However, before you go through them, we highly recommend inspecting your hardware. Check if the Internet cable and its connector aren’t damaged. You should also reset your modem or (if you can) try connecting via WiFi.

Video Guide on How to Fix Ethernet “Unidentified Network” Problem on Windows 10

Table of Contents:

Download Computer Malware Repair Tool

It is recommended to run a free scan with Combo Cleaner – a tool to detect malware and fix computer errors. You will need to purchase the full version to remove infections and eliminate computer errors. Free trial available. Combo Cleaner is owned and operated by Rcs Lt, the parent company of PCRisk.com read more.

Method 1. Run the Network Troubleshooter

One of the first things you should try is to use the Windows 10 Network Troubleshooter, which is specifically designed to ease the hassle of identifying and fixing network-related problems.

1. Right-click the Start Menu and click Settings.

Click Network and Internet

2. Go to Network and Internet.

Click Network troubleshooter

3. Click Network troubleshooter.

4. The troubleshooter will identify the problem and apply a fix automatically.

[Back to Table of Contents]

Outdated or incorrect network adapter drivers could cause “Unidentified Network,” especially if you upgraded to Windows 10 from an older operating system. You will need a computer with access to the Internet. Download the correct drivers and transfer them to the problematic computer using a USB drive, for example, and follow the steps provided below.

1. Right-click the Start Menu and click Device Manager.

Right-click the Network adapter and click Update driver

2. Find the Network adapters section and click the arrow to expand the list.

3. Identify the troublesome adapter, right-click it, and click Update driver.

Select Browse my computer for drivers

4. Click Browse my computer for drivers.

Click the Browse button

5. Click the Browse button and navigate to the location of the drivers you downloaded using another computer.

Navigate to the driver folder location and click OK

6. Select the drivers’ folder and click OK.

Click Next to install the drivers

7. Click Next and allow the drivers to install.

[Back to Table of Contents]

Method 3. Renew the IP Address

If your computer’s IP address has been misconfigured, then this solution is the one for you. Using the command ipconfig /release to release the current IP address, ipconfig /renew to renew the IP configuration might just do the trick. You can also try flushing your DNS with the ipconfig /flushdns command.

1. Simultaneously hold down Windows+R keys to open Run.

Type in CMD in the Run dialog box and open elevated Command prompt

2. Type in CMD in the Run dialog box and simultaneously hold down Shift+Ctrl+Enter keys to open the elevated Command Prompt.

Run ipconfig /release and ipconfig /renew commands

3. Type in ipconfig /release in the Command Prompt window and hit Enter. This command will release the current IP address.

4. Then, Type in ipconfig /renew and hit Enter.

5. You can also type in ipconfig /flushdns and hit Enter to flush the DNS.

6. Close the Command Prompt.

[Back to Table of Contents]

Method 4. Reset TCP/IP

TCP (Transmission Control Protocol) allows communication between an application on a PC and the Internet Protocol. It provides host-to-host connectivity at the transport layer of the Internet. An incorrect configured IP address could result in the Unidentified Network error on your PC. Resetting the IP configuration of the network might fix this issue.

1. Simultaneously hold down Windows+R keys to open Run.

Enter CMD in the Run dialog box and open elevated Command prompt

2. Type in CMD in the Run dialog box and simultaneously hold down Shift+Ctrl+Enter keys to open the elevated Command Prompt.