HP LaserJet P2035 Series Printer – Blinking lights | HP® Customer Support

State of the printer

Go, Ready, and Attention lights all blinking

Initialization/Startup

While in the Startup state, the Go, Ready, and Attention lights blink one after another.

Reconfiguration Initialization

During the printer start up, you can request special initialization sequences that reconfigure the printer. When one of the sequences is requested, such as cold reset, the lights cycle as in the Initialization/Startup state.

Job Cancel

After the cancellation process has been completed, the printer returns to the Ready state.

During the Initialization, Reconfiguration, and Job Cancel processes, pressing buttons has no effect.

Ready light is lit

Ready

The printer is ready with no job activity.

Go

button for 5 seconds while the device Ready light is on and no other jobs are printing.

To print a Configuration page, press and hold thebuttonfor 5 seconds while the device Ready light is on and no other jobs are printing.

Ready light is blinking

Processing Data

The printer is processing or receiving data.

Cancel

button .

To cancel the current job, press thebutton

Attention light is blinking and Go light is lit

Manual Feed or Continuable Error

This state can be reached in the following circumstances:

• Manual feed

• General continuable error

• Memory configuration error

• Personality/Job related error

Go

button .

To recover from the error and print whatever data is possible, press thebutton

If the recovery is successful, the printer goes to the Processing Data state and completes the job.

If the recovery is unsuccessful, the printer returns to the Continuable Error state.

Attention light is blinking

Attention

The print-cartridge door is open.

Close the print-cartridge door.

Attention, Ready, and Go lights are lit

Fatal Error

• Turn off the printer, wait 10 seconds, and turn on the printer.

• If you are unable to resolve the problem, contact HP customer support

Toner and Ready lights are lit

Toner Low

The Go, Ready, and Attention lights act independently of the Toner Low state.

Order a new print cartridge and have it ready.

Toner light is blinking

Toner Missing

The print cartridge has been removed from the printer.

Reinsert the print cartridge in the printer.

Jam light is blinking

Jam

Clear the jam. See Clear jams

Jam light is lit and Paper out light is blinking

Paper Out

Load paper or other media.

Jam light is lit, Paper out light is blinking, and Go light is lit

Paper Mount

The loaded paper or other media is not supported.

Load acceptable paper or other media.

Go

button to override the condition.

Press thebuttonto override the condition.