Connect Network – Zebra Technologies TechDocs

Note: During profile creation, the top right of the window indicates the status of the profile, e.g., Incomplete.

Enter a name for the profile and select Start.

To choose to connect to this network using StageNow bar codes, select Yes, and then select Continue. Otherwise, select No to skip to the RD Config section (if available).

Select the Wi-Fi network type from the drop-down menu, and select Continue.

a. Select whether or not to manage certificates related to Wi-Fi networks, and then select Continue. This allows you to initialize the Android KeyStore, remove a certificate, install CA (server) and client certificates, . Select Yes if you have a certificate-based network. See Setting Types / Certificate mgr for more information.

b. Select whether or not to disconnect from the currently connected network. Select Yes if the device is already connected to a network.

c. Select whether or not to disable all Wi-Fi networks.

d. Select whether or not to add a Wi-Fi network.

e. Select whether or not to enable an existing Wi-Fi network.

f. The Wizards prompts you to connect to a Wi-Fi network. This setting window is pre-populated with certain information that you can not change. Other options are available for selection if desired. See Setting Types / Wi-Fi for instructions.

g. Select Continue.