5000kg Hitachi Electric Chain Hoist (5F) – Prolift Solutions Pty Ltd

Description

Hitachi’s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed while being tested to the Australian standards.

PRODUCT FEATURES

• All Hitachi models are manufactured to comply with AS1418.2.

• Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control. Optional IP65 pendant including E-Stop available.

• Safety Limits: full current and shunt limit switches operate in both directions of hook travel.

• Overload Limiter: this electro-mechanical device is exclusive to the Hitachi range and boasts a far more superior overload protection device than the slipping clutch method. Available on all Hitachi models.

• Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the ‘F’ models have an additional auxiliary centrifugal brake fitted to the motor.

• Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and electrical system can be operated under severe conditions.

• Chain Bucket: noiseless design with flexible mounting.

• High quality Grade 80 zinc plated load chain supplied as standard.

• IP54 protection rating on all electric hoists and trolleys.

• Motor thermal protection on all Hitachi models.

• Optional radio remote control.

• Ambient temperature requirement of -10 to 40 degrees.

• Class M4 inclusive of 180 starts per hour.

• Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.

• Special low headroom hoist and trolley arrangements available to suit tight headroom applications.

• Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure suitability for curved beam applications.

SPECIFICATIONS

• Rated Capacity:  5000kg

• Model:  5F

• Power supply 3phase 415V 50Hz

• Standard Lift:  3m

• Strandard Pendant Drop:  2m

• Hoisting Speed:  2.8m/min

• Motor output:  2.4kW

• Chain Dia:  2 x 10mm x 30mm

• No. of chain falls:  3

• Rating:  30% ED

• Control Voltage:  24V

• Power Cord Length:  5m

• Weight:  121kg

NOTE:

• All Hitachi Hoists comply with AS 1418.2 and are supplied with overload limiter device, 24 volt pendant, motor thermal protection, chain bucket and IP54 rating at no additional cost. Instruction / maintenance / spare parts manual included with all hoists.

• Hoist comes with 2 metres of pendant length and 3 metre Height of Lift (H.O.L.) as standard.

• Hoist comes with 5 metres of round power cable – no plug fitted.

• Increase height of lift or extend pendant length as required.

• For any other Hoist requirements please contact us at [email protected]