Electric Brewery Controllers

We specialize in single vessel electric brewery controllers, which are sold in 120V and 240V versions.  Our controllers are made of high quality UL approved components, and we source our electronic interfaces from Auber.

We offer 2 controller types, and a 240V power regulator which are listed below:

ETC controller:

Tried and true, our dual stage ETC controller is based on a simple switching device, and is easy to program and use. It is offered in 120V for North American customers, and we can custom wire them for our International customers to be used with 240V.  Used reliably for years by professionals and home brewers alike, this type of controllers can be used with any of our single vessel brewing systems, and manages the entire brewing process from mashing, to boiling and fermentation control. We sell ours 15A capable, meaning it can drive a 1650W (2000W International) element without any issue.  Versatile and simple, these are a great option to get into electric brewing.  Our ETC dual stage controller is extremely precise and can read and manage temperature to within 1/10th of a degree.

EZboil controller:

Our EZboil controller is a simpler version of a PID controller.  This controller can time your mash and you can adjust and minimize temperature overshoot.  It notifies you at a set temperature in mash mode, for example if you wan’t to be notified when to drop in your grains.  It has a boil mode which notifies you before you are about to reach a boil, and it reduces power at a preset temperature helping you to prevent an unwanted boil-over.  It also has a great timing feature, which automatically starts to count down when the pre-set temperature has been reached.  It remembers your mash timer preferences, and your boil times, alarming you when finished.  Finally, it knocks out power automatically, if you wish when timing is complete.